{"title":"Angled Shelf Mounts","description":"","products":[{"product_id":"no-drill-shelf-mount-for-eufy-e20-e21-baby-monitor-camera-aussie-made","title":"Eufy E21 \u0026 E20 Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eEufy E20 \u0026amp; E21 Angled Shelf Mount | 30° No-Drill Baby Monitor Stand | Aussie Made\u003c\/p\u003e\n\u003cp\u003eThis angled shelf mount is designed specifically for compatible Eufy baby monitor cameras and provides a stable 30° viewing angle without drilling, wall mounts, adhesive pads, or balancing your monitor on furniture.\u003c\/p\u003e\n\u003cp\u003eDesigned for round-base Eufy cameras only.\u003c\/p\u003e\n\u003cp\u003eCompatibility\u003c\/p\u003e\n\u003cp\u003eFits:\u003cbr\u003e• Eufy SpaceView Pro E20 with round base\u003cbr\u003e• Eufy SpaceView Pro E21 with round base\u003c\/p\u003e\n\u003cp\u003eDoes not fit:\u003cbr\u003e• Square-base Eufy cameras\u003cbr\u003e• Other Eufy models\u003c\/p\u003e\n\u003cp\u003eNot sure which base you have? Send us a photo and we’ll confirm compatibility before you order.\u003c\/p\u003e\n\u003cp\u003eThe fixed 30° angle helps capture more of the sleep space clearly while reducing awkward top-of-head viewing angles.\u003c\/p\u003e\n\u003cp\u003eIt simply sits on a shelf, dresser, or flat surface and stays securely in place.\u003c\/p\u003e\n\u003cp\u003eDesigned with a minimal, low-profile shape that blends neatly into nursery and bedroom furniture.\u003c\/p\u003e\n\u003cp\u003eDesigned, printed, and tested in Mount Compass, South Australia by our small family business.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Love It\u003c\/p\u003e\n\u003cp\u003e• Stable 30° angled view for clearer monitoring\u003cbr\u003e• No drilling, wall damage, or adhesive pads\u003cbr\u003e• Secure fit with no wobble\u003cbr\u003e• Ideal for cots, Snoo bassinets, floor beds, and shared rooms\u003cbr\u003e• Lightweight and easy to reposition\u003cbr\u003e• Great for travel and temporary setups\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Printed using durable PLA\u003cbr\u003e• Designed and made in South Australia\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003c\/p\u003e\n\u003cp\u003e• 1 × Eufy E20 \/ E21 angled shelf mount\u003c\/p\u003e\n\u003cp\u003eCamera not included.\u003c\/p\u003e\n\u003cp\u003eHow to Use\u003c\/p\u003e\n\u003cp\u003e1. Place the Eufy camera into the mount\u003cbr\u003e2. Position it on a stable shelf, dresser, or flat surface\u003cbr\u003e3. Done\u003c\/p\u003e\n\u003cp\u003eImportant Safety Note\u003c\/p\u003e\n\u003cp\u003eThis is a shelf-mounted accessory and must be placed on a stable, level surface.\u003c\/p\u003e\n\u003cp\u003eAlways position the camera and mount so they cannot fall into a cot, bassinet, or onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords secured and out of reach. Adult supervision and regular checks required.\u003c\/p\u003e\n\u003cp\u003eAussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned, printed, and packed by our small family business in Mount Compass, South Australia.\u003c\/p\u003e\n\u003cp\u003eFast dispatch with tracked shipping.\u003cbr\u003eWorldwide shipping available.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":43521428815895,"sku":"shelf1 (stand15)","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/IMG-9427.png?v=1777523729"},{"product_id":"vtech-rm7754hd-baby-monitor-mount-angled-shelf-no-drill-3d-printed","title":"VTech RM7754HD \u0026 More Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eVTech RM7754HD \u0026amp; RM5754HD Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• VTech RM7754HD\u003cbr\u003e• VTech RM5754HD\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• Not compatible with other VTech camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eVTech uses many similar model numbers and camera bases.\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• One-piece design with no assembly required\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Great for travel\u003cbr\u003e• Minimal, low-profile design\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera and monitor not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":43521429504023,"sku":"shelf12 (stand1)","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/308B83DC-3703-465E-92AB-B94AA196E9BF.png?v=1777523481"},{"product_id":"vtech-baby-monitor-mount-no-drill-shelf-or-wall-stand-3d-printed","title":"VTech BM3900N \u0026 More Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eVTech BM3900N \u0026amp; More Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• VTech BM3900N\u003cbr\u003e• VTech VM3263HD\u003cbr\u003e• VTech VM7367HD\u003cbr\u003e• VTech VM5467\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• Not compatible with other VTech camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eVTech uses many similar model numbers and camera bases.\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":43521429864471,"sku":"shelf6 (stand26)","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/IMG-9423.png?v=1777522047"},{"product_id":"oricom-obh930-baby-monitor-mount-no-drill-angled-shelf-stand","title":"Oricom OBH930 Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eOricom OBH930 Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• Oricom OBH930 baby monitor\u003c\/p\u003e\n\u003cp\u003e✔ Requirements:\u003cbr\u003e• Threaded camera base only\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• Not compatible with cameras without a threaded base\u003cbr\u003e• Not compatible with other Oricom camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Screw the camera into the mount\u003cbr\u003e2. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera and monitor not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":43521429930007,"sku":"shelf4 (stand8)","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/IMG-4453.png?v=1768453099"},{"product_id":"vtech-baby-monitor-camera-mount-angled-shelf-no-drill-3d-printed","title":"VTech BM5200N \u0026 More Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eVTech BM3350N \u0026amp; More Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• VTech BM3350N\u003cbr\u003e• VTech BM5200N\u003cbr\u003e• VTech VM5254\u003cbr\u003e• VTech BM5254\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• Not compatible with other VTech camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eVTech uses many similar model numbers and camera bases.\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera and monitor not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":43521430257687,"sku":"shelf5 (stand4)","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/0001-5177389916672448389.png?v=1777890409"},{"product_id":"vtech-baby-monitor-shelf-mount-no-drill-angled-stand-3d-printed","title":"VTech BM5750HD \u0026 More Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eVTech BM5750HD \u0026amp; More Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• VTech BM5750HD\u003cbr\u003e• VTech BM7750HD\u003cbr\u003e• VTech BM5570HD\u003c\/p\u003e\n\u003cp\u003e✔ Requirements:\u003cbr\u003e• Non-threaded camera base only\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• Not compatible with threaded-base VTech cameras\u003cbr\u003e• Not compatible with other VTech camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eVTech uses many similar model numbers and camera bases.\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":43521430487063,"sku":"shelf10 (stand34)","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/0001-5832663670475108951.png?v=1777898154"},{"product_id":"vtech-baby-monitor-angled-shelf-mount-no-drill-camera-stand-3d-printed","title":"VTech RM7764HD \u0026 More Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eVTech RM7764HD \u0026amp; More Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• VTech RM7764HD\u003cbr\u003e• VTech RM7764HD-2\u003cbr\u003e• VTech RM7764HDV2\u003cbr\u003e• VTech RM7764HDV2-2\u003cbr\u003e• VTech RM5764HD\u003cbr\u003e• VTech RM5764HD-2\u003cbr\u003e• VTech RM724HD\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• All listed models share the same camera base design\u003cbr\u003e• Not compatible with other VTech camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eVTech uses many similar model numbers and camera bases.\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera and monitor not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":43521430749207,"sku":"shelf13 (stand22)","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/IMG-4234.png?v=1768189060"},{"product_id":"vtech-baby-monitor-angled-shelf-mount-no-drill-stand-3d-printed","title":"VTech BM4700N \u0026 More Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eVTech VM5263 \u0026amp; More Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• VTech VM5263\u003cbr\u003e• VTech BM5710\u003cbr\u003e• VTech BM4700N\u003cbr\u003e• VTech VM5463\u003cbr\u003e• VTech BM5600N\u003cbr\u003e• VTech BM3800N\u003cbr\u003e• VTech BM5700N\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• All listed models share the same camera base design\u003cbr\u003e• Not compatible with other VTech camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eVTech uses many similar model numbers and camera bases.\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera and monitor not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":43521431273495,"sku":"shelf8 (stand2)","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/0001-4078511607964435288.png?v=1777889719"},{"product_id":"vtech-bm4500n-bm5550n-owl-camera-mount-angled-shelf-stand-no-drill-3d-printed","title":"VTech BM4500N \u0026 More Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eVTech BM4500N \u0026amp; BM5550N Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• VTech BM4500N\u003cbr\u003e• VTech BM5550N\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• All listed models share the same camera base design\u003cbr\u003e• Not compatible with other VTech camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eVTech uses many similar model numbers and camera bases.\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera and monitor not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":43521431306263,"sku":"shelf7 (stand10)","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/IMG-9445.png?v=1777631706"},{"product_id":"vtech-baby-monitor-angled-shelf-mount-no-drill-camera-stand-3d-printed-1","title":"VTech RM7766HD \u0026 More Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eVTech RM7766HD \u0026amp; More Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• VTech RM5866HD\u003cbr\u003e• VTech RM7764HD\u003cbr\u003e• VTech RM7766HD\u003cbr\u003e• VTech RM5754HD\u003cbr\u003e• VTech RM5764HD\u003cbr\u003e• VTech RM7754HD\u003cbr\u003e• VTech RM714HD\u003cbr\u003e• VTech RM724HD\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• All listed models share the same camera base design\u003cbr\u003e• Not compatible with other VTech camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eVTech uses many similar model numbers and camera bases.\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera and monitor not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":44080694034455,"sku":"Shelf11 (stand13)","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/IMG-0207.png?v=1779846704"},{"product_id":"owlet-cam-2-baby-monitor-mount-angled-shelf-stand-no-drill-3d-printed-in-australia","title":"Owlet Cam 2 Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eOwlet Cam 2 Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• Owlet Cam 2 with magnetic base only\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• Does NOT fit Owlet Cam 1\u003cbr\u003e• Does NOT fit non-magnetic Owlet camera bases\u003cbr\u003e• Not compatible with other Owlet camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Position your camera onto the mount\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera and monitor not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":44080874520599,"sku":"shelf16","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/IMG-9437.png?v=1777546262"},{"product_id":"tweetycam-angled-shelf-mount-for-baby-monitor-camera-aussie-made","title":"TweetyCam Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eTweetyCam Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• TweetyCam baby monitor cameras\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• Not compatible with other camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera and monitor not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":44080875274263,"sku":"shelf20","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/IMG-9461.png?v=1777635634"},{"product_id":"infant-optics-dxr-8-dxr-8-pro-cam-2-angled-shelf-mount","title":"Infant Optics DXR-8 \u0026 DXR-8 Pro Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eInfant Optics DXR-8 \u0026amp; DXR-8 Pro Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• Infant Optics DXR-8\u003cbr\u003e• Infant Optics DXR-8 Pro\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• Not compatible with other Infant Optics camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera and monitor not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":44145311416343,"sku":"shelf21","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/IMG-0280.png?v=1779850869"},{"product_id":"eufy-baby-monitor-shelf-mount-angled-e210","title":"Eufy E210 Spaceview Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eEufy E210 Spaceview Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• Eufy SpaceView Pro E210\u003c\/p\u003e\n\u003cp\u003ePlease note:\u003cbr\u003e• Not compatible with other Eufy camera shapes or bases\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":44223541575703,"sku":"Shelf17","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/IMG-9441.png?v=1777630799"},{"product_id":"vtech-baby-monitor-shelf-mount-angled-bm5856hd-more-m","title":"VTech Smart HQ Max \u0026 More Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eVTech Smart HQ Max \u0026amp; More Angled Shelf Mount | 30° View | Aussie Made\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• VTech BM5850HD\u003cbr\u003e• VTech Smart HQ Max 346700\u003c\/p\u003e\n\u003cp\u003e❌ Does NOT fit:\u003cbr\u003e• VTech BM3900N\u003cbr\u003e• Other VTech camera shapes and bases\u003c\/p\u003e\n\u003cp\u003ePlease note: The BM3900N looks very similar but uses a different fitting and requires a separate listing.\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera and monitor not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":45060541612055,"sku":"Shelf23","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/0001-3454762966824966375.png?v=1777815254"},{"product_id":"babysense-hds2-baby-monitor-angled-shelf-mount","title":"Babysense HDS2TX Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eDesigned for compatible baby monitors. Full compatibility list below.\u003cbr\u003eFixed 30° angle for a clearer view into the cot, bassinet or crib from high shelves or awkward angles\u003cbr\u003eSits securely on a shelf, dresser or other flat surface\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis angled shelf mount positions your baby monitor at a fixed 30° angle for a clearer view of your baby without drilling into walls or balancing cameras on books and household items.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• Babysense HDS2\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Fixed 30° viewing angle\u003cbr\u003e• Stable, wobble-free design\u003cbr\u003e• No drilling or wall damage\u003cbr\u003e• Lightweight and easy to move\u003cbr\u003e• Minimal, low-profile design\u003cbr\u003e• Great for travel\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Place the mount on a shelf, dresser or other flat surface\u003cbr\u003e2. Slide your camera onto the mount until secure\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Angled Shelf Mount\u003c\/p\u003e\n\u003cp\u003eCamera not included.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":45107073024023,"sku":null,"price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/49FFF97B-F656-49C2-91F7-FC36A24C78EC.png?v=1779851693"},{"product_id":"vtech-bm5750hd-more-angled-shelf-mount-threaded-base-model","title":"VTech BM5750HD \u0026 More Angled Shelf Mount | 30° View | Aussie Made","description":"\u003cp\u003eConverts compatible VTech baby monitors to a standard 1\/4” threaded mount. Full compatibility list below.\u003cbr\u003eFor threaded base cameras only\u003cbr\u003eModel-specific fit, not universal\u003cbr\u003eWorldwide shipping available\u003c\/p\u003e\n\u003cp\u003eWhat This Does\u003cbr\u003eThis adapter lets you attach compatible VTech baby monitor cameras to stands, arms, clamps, goosenecks and other standard 1\/4” threaded mounts.\u003c\/p\u003e\n\u003cp\u003eQuick Check Before You Order\u003cbr\u003e✔ Fits:\u003cbr\u003e• VTech BM5750HD with threaded base\u003cbr\u003e• VTech BM7750HD with threaded base\u003cbr\u003e• VTech BM5570HD with threaded base\u003cbr\u003e• VTech VM901 with threaded base\u003c\/p\u003e\n\u003cp\u003eNot sure? Send us a photo or model number before ordering and we’ll confirm compatibility.\u003c\/p\u003e\n\u003cp\u003eWhy Parents Like It\u003cbr\u003e• Adds standard 1\/4” threaded compatibility\u003cbr\u003e• Works with many common baby monitor stands, arms and clamps\u003cbr\u003e• Secure fit with no permanent modification\u003cbr\u003e• Lightweight and easy to remove\u003cbr\u003e• Minimal, low-profile design\u003c\/p\u003e\n\u003cp\u003eHow To Use\u003cbr\u003e1. Attach the adapter to your camera\u003cbr\u003e2. Connect it to your compatible 1\/4” threaded mount\u003cbr\u003e3. Check everything is secure before use\u003c\/p\u003e\n\u003cp\u003eWhat You’ll Receive\u003cbr\u003e• 1 × Baby Monitor Threaded Adapter\u003c\/p\u003e\n\u003cp\u003eCamera not included.\u003c\/p\u003e\n\u003cp\u003eFlexible mounting arm sold separately and available at checkout.\u003c\/p\u003e\n\u003cp\u003eSafety\u003cbr\u003eAlways check the adapter, mount and camera are fully secure after installation or adjustment.\u003c\/p\u003e\n\u003cp\u003eNever position a monitor where it could fall onto a baby or child.\u003c\/p\u003e\n\u003cp\u003eKeep cords safely out of reach and use only as intended.\u003c\/p\u003e\n\u003cp\u003eOur mounts are 3D printed in PLA to a high standard with strength and stability in mind. If you have any issues with your mount, please contact us and we’ll do everything we can to help.\u003c\/p\u003e\n\u003cp\u003eShipping\u003cbr\u003e• Ships from South Australia\u003cbr\u003e• Orders are dispatched Monday, Wednesday and Friday\u003cbr\u003e• Tracking included on all orders\u003cbr\u003e• Australia: usually 2–7 business days after dispatch\u003cbr\u003e• International: varies by location\u003c\/p\u003e\n\u003cp\u003eReturns\u003cbr\u003eReturns are accepted if the item isn’t suitable, with return postage covered by the buyer.\u003c\/p\u003e\n\u003cp\u003eThese are model-specific products, so please check compatibility before ordering.\u003c\/p\u003e\n\u003cp\u003eAbout Us\u003cbr\u003eWe’re a small family business in Mount Compass, South Australia, designing and 3D printing practical baby monitor mounting solutions from our home workshop after running into the same frustrating setup problems ourselves.\u003c\/p\u003e\n\u003cp\u003eDesigned for real homes by parents who actually use them.\u003c\/p\u003e\n\u003cp\u003eNeed Help?\u003cbr\u003eDon’t see your model listed? Send us a photo or model number. We’re always expanding our range and may still be able to help.\u003c\/p\u003e","brand":"Clover \u0026 Fox Forge","offers":[{"title":"Default Title","offer_id":45146141229079,"sku":"Shelf3","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/files\/IMG-4393.png?v=1768387976"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0762\/2728\/0919\/collections\/IMG-6560.png?v=1779062317","url":"https:\/\/cloverandfoxforge.com\/collections\/angled-shelf-mounts.oembed","provider":"Clover \u0026 Fox Forge","version":"1.0","type":"link"}