---

Snoo, bassinet & cot mount

• Fit the mount securely to a compatible rim before attaching the camera.
• Position the camera toward the foot end, never directly above your child’s head.
• Keep all monitor cords well out of reach.
• Compatible rim thickness must be 22.2 mm or less. Do not force the mount onto a thicker rim.

---

Angled shelf mount

• Place the mount fully onto a stable shelf or ledge before fitting the camera.
• Check that the shelf and mount are secure and that the camera cannot be knocked or pulled down.
• Keep cords out of reach.

---

Angled wall mount

• Use suitable fixings for your wall type and make sure the mount is secure before attaching the camera.
• Route the cord safely and keep it well out of reach.
• Do not modify the mount or force the camera into place.

---

1/4 inch threaded adapter

• Fit the model-specific adapter to the camera first.
• Attach the adapter to a standard 1/4 inch threaded mount, tripod or compatible flexible arm.
• Support the camera while tightening. Do not overtighten or force the adapter.

---

Screen dock

• Place the dock on a stable, flat surface.
• Seat the parent unit fully into the dock and route the charging cable through the cord holder where applicable.

---

Flexible TWIST & CLAMP mounts

These setup videos are being added next. For now, remove the camera before adjusting or repositioning a flexible mount, and never twist or rotate the mount while the camera is attached.